Over the past few weeks, I’ve been testing out my third pair of running shoes from the UA HOVR™ series; the Velociti 2’s. I found these runners a standout from the other two pairs I tried. Granted, I only tested the other two on a treadmill, whereas the Velociti’s I tested in various terrains.
The HOVR™ Infinites were the first pair I tested. Under Armour describes these as an outdoor distance running shoe. Unfortunately, since I received them in the dead of winter and I’m a baby when it comes to the cold, I only tested them out indoors on the treadmill. The consensus was that although I did think these would make a great runner for some, for me and because of my foot type (flat AF), the amount of cushioning caused some foot pain.
Next on the testing docket was the HOVR™ Sonic 2s. These were designed more for the everyday runner; they were lighter than the Infinite’s in weight, but still had a bit more cushioning than what I’m used to with the Nike LunaRacer +3. I tested them out in April on the treadmill and although they were more comfortable than the Infinites, due to my foot type, they weren’t a great fit for me. I recommended these shoes to runners with a more neutral stride that prefers a higher stack height.
The most recent pair; the Velociti 2’s had the least cushioning of the three and were designed as more of a tempo shoe with a focus on speed. SPOILER ALERT: Out of the trio, these were by far favourite.
As I’ve mentioned multiple times in my previous reviews, just because a shoe works for me, doesn’t mean it will work for you. There’s an abundance of variables and considerations when choosing the right shoe for you. Including (but not limited to): stride, foot type, arch height, pronation, and stack height preference. Some need to not only consider these, but also need more of a custom shoe and orthotic inserts. I’m not an expert in running shoes by any means, but I do know that the choice of a shoe is an individualistic choice. The right shoe can give you the edge you need to get that personal best (PB), provide a comfortable and smooth ride while running, and make your feet feel, well, special. The adverse effects aren’t so pretty; the wrong shoe can cause pain in the knees and shins, throw you off balance, and WORST, make the experience terrible causing you to stop enjoying running in its very essence.
For the past 6+ years, I’ve been using the same brand and model of runners as aforementioned in this post and several others. I stick to the same, discontinued brand because I’ve tried others and to be quite honest, no other shoe has been such a great fit for me. My feet are flat and I overpronate while running. I look for runners with little cushioning, low stack height, stability (slight stiffness), and can be worked in within a couple runs.
“The UA HOVR™ Velociti 2 is light, low & sleek to keep you fast. The UA HOVR™ Velociti 2 incorporates a thinner layer of HOVR cushioning, providing maximum energy return, while Micro G foam frames the dynamic mesh under the HOVR foam, delivering a light and snappy ride.”
Tech Sheet Features and Construction Overview (from UA)
- Engineered Mesh Upper: lightweight and breathable with stretch and structure where needed – no need for overlays
- Removable, 3D-Molded Sock Liner: cradles the foot with step-in comfort
- Cushioning system: Soft UA HOVR foam combined with a dynamic mesh Energy Web creates and incredible zero gravity feel + energy return
- Lightweight High Abrasion Rubber:covers a large surface for impact durability and gives a fluid feel
- Reflectivity: on the tongue, heel, and UA logo
- Micro G Foam: frames the energy web to keep the ride stable, light, and snappy
- Blown Rubber: 3.5mm blown rubber under forefoot for a springy feel.
Specs:
- Weight: 213g
- Offset: 8mm
- Heights: 23mm in the heel and 15mm forefoot
- Price: $120 CAD
MAPMYRUN
All UA HOVR™ series shoes have a pod embedded in the midsole of the right shoe and 
THE TRIALS
TRIAL #1 – OUTDOORS
After a brutal and long winter, followed by a rainy and cold spring, the weather is finally starting to warm up in Toronto. That being said, I decided to do my first trial run 
TRIAL #2 – TREADMILL
To diversify the testing terrain, for my second trial, I ran on the treadmill. For this one, I incorporated high-intensity interval training logging 8 kilometer at a 4’20 pace. I was very impressed by how smooth the run went. I noticed the shoes had a bit of stiffness too them, but in a good way. I felt no discomfort whatsoever and due to the lower cushioning, the shoe felt more responsive to quick movements. When I switch the levels up from 8.5 to a level 10 or 10.5 for example, the shoes adapted quickly.
TRIAL #3 – THE TRACK
To mix things up a bit, I brought these new friends to the track with me. 
The Verdict
This is my first well-rounded review of the HOVR series where I got the opportunity to test the shoes on multiple terrains whilst also using the accompanying app. Although I’ve only included three trials in this post where I paid extra special attention to the feeling of the shoes on my feet and impact on my running performance, I’ve used these runners subsequent times after. Overall, I was really impressed with these shoes specifically for my foot type. The biggest pluses for me was the light cushioning, slight stiffness, responsiveness, and the look (very aesthetically pleasing). I’d recommend these shoes for runners with flatter feet and who like the features as described above, but still think it’s very important to try them out yourself before you buy. Overall, I’m excited to add a new brand and model of runners to my robust collection of Nike LunaRacer 3+’s. Thank you Under Armour for giving me the opportunity to test out the full suite of performance runners from the HOVR™ line!
Where to Buy
If you’re interested in grabbing a pair, you can follow the links below to buy online-
Follow this link for free shipping on underarmour.com (US-Only).
Here’s this link to shop the Velociti 2’s on underarmour.ca.
